DENZ PREMIUM OPTICS FOR RED COMPACT EVF

REF: RED-790-0781

4.150 € tax excl.

€5,021.50

tax incl.

Have you seen it cheaper? Ask us for an offer!

Add to wishlist

For all products that are not in stock and / or cannot be added to the cart please contact us at info@cattscamera.com or through the contact form below.

Talk to sales support.

shuffleRelated products

Description

The Denz Premium Optics upgrade for RED® Compact EVF is a quick and seamless option to enhance the RED Compact EVF and DSMC2 RED EVF (OLED). This ocular attaches to the integrated bayonet mount on the EVF, replacing the standard optics and providing the following enhancements to the EVF

Higher optical qualities with a sharper image to assist with operating and pulling focus.
Improved off-axis viewing angles.
Increased diopter range of -4 to +3.
An integrated ocular heater (powered by optional 5-Pin cable) for humid or sub-zero conditions to prevent fogging.
A quick connect eye-cup for easy adjustability and light blocking.

NOTES:

The RED Compact EVF is sold separately.
When using the RED EVF Mount and RED EVF Extension Arm, a thumbscrew must be replaced by a wing nut (2x included) to enable full motion of the EVF.
If the supply voltage is too high (> 40V), the electronic circuit of the eyecup might be damaged.
For issues or troubleshooting, contact office@denz-precision.com.

WARNING: DO NOT point the RED® Compact EVF eyepiece at direct sunlight. Continued exposure to direct sunlight can damage the EVF. When the operator is not using the EVF, they must keep the eyepiece pointed away from sunlight. Damage to the RED Compact EVF caused by continued exposure to direct sunlight is not covered under the warranty.

Features

DENZ PREMIUM OPTICS FOR RED COMPACT EVF

DIMENSIONS	Height: 3.03 in. (77.00 mm) Width: 3.54 in. (90.00 mm Depth: 4.09 in. (104.00 mm)
WEIGHT	Approximately 0.88 lbs (400.00 g)
MATERIAL	Aluminum, Plastic
EVF MOUNTING	Via RED Compact EVF/DSMC2 EVF Bayonet Mount
DIOPTER RANGE	–4 to +3 diopter correction range
VOLTAGE	10 – 32 VDC Inverse polarity protection safety shutdown at overvoltage and undervoltage
CURRENT CONSUMPTION	Approximately 0.54 A at 12 VDC Approximately 0.30 A at 24 VDC No residual current when switched off
HEATING POWER	Approximately 7W regardless of supply voltage Two temperature settings HI for very cold conditions up to -18°C/-0.4°F LO for normal conditions and climate
POWER IN	Fully coated optics with >5-Pin 0B (Pin 1 Power/ Positive, Pin 4 Ground/ Negative)
OPERATING TEMPERATURE	–30°C to 50°C (–22°F to 122°F)
STORAGE TEMPERATURE	0% to 85%, non-condensing