STANDARD OR COMPLETE
The BLACK ARM comes in two versions. The BLACK ARM Standard is made to work with gimbals and cameras weighing between 5-13kg (11-28lbs). The BLACK ARM Full is for users working with higher loads and weighing between 5-32kg (11-70lbs). Of course, you have the option to upgrade from the standard version to a full version, if needed.
The BLACK ARM is shipped with two 7.0mm springs, which carries the 5-13kg. The COMPLETE is shipped with four 7.0mm springs and four 7.5mm springs, which carries the entire 5-32kg range. You can use the springs in single (one spring on each side) or dual (two springs on each side) configuration, to precisely achieve the required lift.
The damping action of all axes, vertical, pitch and roll, is created by custom-made hydraulic actuator dampers that are fully adjustable. Damping is adjusted with a knob that has 22 steps, to precisely dial in the exact amount of damping you need for your plane. The BLACK ARM Standard ships with one damper for each of the three axes, while the Complete ships with a total of six dampers, allowing you to have dual dampers on each axis if needed, or as spares.
ANTI-VIBRATION MOUNTS (SOLD SEPARATELY)
Each BLACK ARM is shipped with an Antivibration Mount (AVM). The primary purpose of the AVM is to reduce high frequency vibrations, such as car engine noise. To maximize the efficiency of the AVM, you should use the version that fits your load and conditions.
There are two types of AVMs, the original Wire AVMs and the new Tranquilizer.
The Wire AVMs come in five different weight ranges, and are very easy to use. Just put on the correct AVM and you're ready to go.
The Tranquilizer has many settings to fine tune its performance, and can give better results if you have the time and skill to set it up correctly.
Pick the one that matches the total weight of everything (gimbal, camera and accessories) and you'll be holding on to the black arm.
Wire AVM weight ranges:
Wire AVMs are available in five different weight ranges. Choose the one that best suits the total weight of your equipment.
- No.01 - 7-10 kg (15-22 lbs) https://cattscamera.com/en/car-mounts/1082-antivibration-mount-no1-7-10-kg.html
- No.02 - 10-14 kg (22-31 lbs) https://cattscamera.com/en/car-mounts/798-antivibration-mount-no2-10-14kg.html
- No.03 - 14-19 kg (31-42 lbs) https://cattscamera.com/en/car-mounts/796-anti-vibration-mount-no3-14-19kg.html
- No.04 - 19-26 kg (42-57 lbs) https://cattscamera.com/en/car-mounts/797-anti-vibration-mount-no4-19-26kg.html
- No.05 - 26-34 kg (57-75 lbs) https://cattscamera.com/en/car-mounts/1081-anti-vibration-mount-no5-26-34-kg.html
Tranquilizer weight ranges: https://cattscamera.com/en/car-mounts/616-flowcine-tranquilizer.html
The Tranquilizer is shipped with two sets, the Shore 30 and Shore 40. All other packages are sold separately.
- Shore 20 weight range: up to 5.40 - 10.75kg
- Shore 30 weight range: up to 6.70 - 13.25kg
- Shore 40 weight range from 11.25 - 22.50kg.
- Shore 50 weight range up to 13.75 - 27.50kg
- Shore 60 weight range up to 19.00 - 34.50kg
FLIGHT CASE
The BLACK ARM is shipped in a Pro case. It is manufactured in black, to perfectly match the BLACK ARM. It has powder coated black metal corners, heavy duty recessed handles and butterfly latches. It also has wheels, so you can roll the case around like a travel suitcase. To match the clean exterior, the Pro case's foam is all black.
MOUNTING OPTIONS
Mounting the BLACK ARM is as simple as attaching it to a standard 48-52mm Speed Rail. You build a rig on your vehicle, using standard grip components such as the speed rail and double clamps, possibly using the Flowcine Universal bracket or Stub mount. Then you simply clamp the BLACK ARM there, with the two single clamps on the back of the arm.
There are several ways to attach the gimbal to the BLACK ARM. The included base plate has a hole pattern to match the Freefly Toad in one hole and a Cinemilled Universal Ronin mount for easy attachment of MoVI and Ronin gimbals. We also make a female Mitchell mount for gimbals using the Mitchell connector.
On each side of the BLACK ARMs head, there are cheese plates suitable for mounting batteries or Kenyon gimbals.
English
Español
