PB-S98S 98Wh Multi-sockets Square Digital Battery Pack

REF: SWIT-PB-S98S

Last items in stock

205 € tax excl.

€248.05

tax incl.

WARNING ABOUT BATTERIES.

The transport of batteries is subject to special restrictions.

For more information, please contact us on +34 917 865 627 or by mail at info@cattscamera.com

Opening hours: Monday to Friday from 09:30 to 14:30 and from 15:30 to 18:30.

shuffle Ver productos relacionados
local_shipping Envío rápido a toda España
lock Pago 100% seguro
help_outline ¿Dudas? Habla con nuestro equipo

Petición de reserva

Lo sentimos, ha ocurrido un error mientras se mandaba el formulario. Vuelve a intentarlo, si sigue sin funcionar contacta con el comerciante.

Debes aceptar la política de privacidad.

Gracias por tu interés. La petición ha sido enviada. Próximamente nos pondremos en contacto contigo.

Description

Square-shaped design for cinema cameras

PB-S series camera batteries have a compact design, are shorter than normal V/Gold mount batteries, and fit most Cine cameras perfectly.

98Wh / 6.8Ah Capacity

Consists of 12pcs high class 18650 battery cells, the rated voltage is 14.4V and reaches a high capacity of 98Wh / 6.6Ah.

It can work about 3 hours for normal cameras.

2× D-tap, 1× USB

PB-S98S provides 2x D-tap output sockets with 8A/100W charging, and 1× USB 5V/2A socket, to power other camera devices together.

Power Digital Info

The built-in LCD display can show the remaining power percentage, remaining working time, low power warning and battery cycle times, and supports displaying viewfinder information on both SONY camera and NETWORK.

Description of LCD warning codes

- P01 - P13: battery locked and can be recovered.

- E01 - E03: error not recoverable, please contact the manufacturers for repair, do not disassemble the battery. When the battery rests more than 10 days or runs out of power, it will enter sleep mode and the LCD will not be displayed.

Common battery protection codes

- P01: power has run out, please charge the battery as soon as possible.

- P02: over voltage during charging, please remove the battery, discharge the battery to decrease the voltage to recover.

- P03: over current when charging, please remove the battery, and it will recover after 30 seconds.

- P05-07: the load is too heavy, please remove the battery, and it will recover after 30 seconds.

- P08-09: battery short circuit, please remove the battery and make sure the electrodes are clean, and it will recover after 30 seconds.

- P10-13: temperature protection, please remove the battery and put it at room temperature to recover.

Features

- Battery plate: V-mount.

- Nominal voltage: 14.4V.

- Capacity: 98Wh,6.8Ah.

- Max output:

- In total: 150W.

- Electrodes: 150W, 12A.

- USB:10W, 5V/2A.

- D-tap: 120W / 10A.

- Dimension: 121×95×59mm.

- Charging Temperature: -40°C.

- Discharging Temperature: -20°C-50°C (Capacity and Max Load may decrease when operating below 0°).