Square-shaped design for cinema cameras

PB-S series camera batteries have a compact design, are shorter than normal V/Gold mount batteries, and fit most Cine cameras perfectly.

98Wh / 6.8Ah Capacity

Consists of 12pcs high class 18650 battery cells, the rated voltage is 14.4V and reaches a high capacity of 98Wh / 6.6Ah.

It can work about 3 hours for normal cameras.

2× D-tap, 1× USB

PB-S98S provides 2x D-tap output sockets with 8A/100W charging, and 1× USB 5V/2A socket, to power other camera devices together.

Power Digital Info 

The built-in LCD display can show the remaining power percentage, remaining working time, low power warning and battery cycle times, and supports displaying viewfinder information on both SONY camera and NETWORK.

Description of LCD warning codes

     - P01 - P13: battery locked and can be recovered.

     - E01 - E03: error not recoverable, please contact the manufacturers for repair, do not disassemble the battery. When the battery rests more than 10 days or runs out of power, it will enter sleep mode and the LCD will not be displayed.

Common battery protection codes

     - P01: power has run out, please charge the battery as soon as possible.

     - P02: over voltage during charging, please remove the battery, discharge the battery to decrease the voltage to recover.

     - P03: over current when charging, please remove the battery, and it will recover after 30 seconds.

     - P05-07: the load is too heavy, please remove the battery, and it will recover after 30 seconds.

     - P08-09: battery short circuit, please remove the battery and make sure the electrodes are clean, and it will recover after 30 seconds.

     - P10-13: temperature protection, please remove the battery and put it at room temperature to recover.