KA-S30B | High load with multi-sockets Hot-Swap Plate, for 14V B-Mount battery to V-mount devices

REF: SWIT-KA-S30B

749 € tax excl.

€906.29

tax incl.

Have you seen it cheaper? Ask us for an offer!

KA-S30B | High load with multi-sockets Hot-Swap Plate, for 14V B-Mount battery to V-mount devices

Add to wishlist

For all products that are not in stock and / or cannot be added to the cart please contact us at info@cattscamera.com or through the contact form below.

Talk to sales support.

shuffleRelated products

Description

With the KA-A30B B-Mount Hot Swap Plate for ARRI ALEXA SXT/LF/65 from SWIT, you will not need to switch off the camera when changing your battery.

The KA-A30B powers the ARRI ALEXA SXT/LF/65 camera at 28.8V (22-33.6V) by the rear contact pins, and when you remove the B-mount battery, the KA-A30B output regulates 28V to the camera for hot swapping.

The KA-A30B has 32Wh/3Ah battery cells inside, and with 200W constant high load, even after 1000 cycle times, the plate can ensure two minutes for hot swapping.

An LCD screen displays countdown seconds when changing the battery. When the battery is removed, the screen will count down from 120 seconds; you just need to put on a new battery before it counts down to zero.

The new battery will then charge the hot swap plate, and the countdown seconds will go back to 120.

Features

- Battery Capacity: 34 mAh / 32 Wh

- Power Input: LEMO 8-Pin: 22 to 33.6 VDC

- Maximum Load: 200 W

- Power Output:

- LEMO 2-Pin: 14 VDC

- D-Tap: 14 VDC

- USB Type-A: 5 VDC at 2 A

- Plate Front / Battery Mount: B-Mount

- Number of Battery Bays: 1

- Hot-Swap Support: Yes

- Material of Construction: Aluminum