English
Español
Bright Tangerine Prodigy Air Deflector Production Kit
7.199 €
tax excl.
Have you seen it cheaper? Ask us for an offer!
€8,710.79
tax incl.
The Compressor is the engine of the Prodigy Air Deflector.
It filters and compresses the air, accelerating it to 300+ mph.
Rugged and compact, it is easy to rig with threaded mounting points and tethers for safety wires. The control panel features large buttons to operate when wet or wearing gloves.
Description
Prodigy Air Deflector Compressor
The Compressor is the engine of the Prodigy Air Deflector.
It filters and compresses the air, accelerating it to 300+ mph.
Rugged and compact, it is easy to rig with threaded mounting points and tethers for safety wires. The control panel features large buttons to operate when wet or wearing gloves.
Prodigy Air Head
The Prodigy Air Head directs airflow from the compressor to deflect rain, dust and debris.
The special piece of glass is impact resistant, treated with a superhydrophobic coating to repel water and particles. Replacing the glass only takes a few minutes and requires no special tools. It accepts up to 3 filter trays and can be set up as clip on or rod mounted.
Detach the hose to use it as a standalone matte box with a large field of view.
Flat surfaces make it easy to bag the camera for protection with an optional top flag available.
Prodigy Power Cable
Power the Prodigy Air Deflector with this 2-pin Lemo to 3-pin XLR cable.
The 1.5m (4.9ft) cable made from high-quality materials rated for 24V offers minimal voltage drop. They are flexible and reliable for the most demanding conditions.
Prodigy Filter
The Prodigy accelerates air to over 300 miles per hour. The high airflow filter purifies to 1 micron blocking out dust particles and debris from entering the compressor.
It is robust, waterproof, and designed to operate in a wide temperature range (-40 to +50°C).
Prodigy Spare Glass
The Prodigy uses a special piece of glass that is neutral and impact resistant. It has a superhydrophobic coating that repels water and particles. Replacing the glass is a simple process.
Prodigy Hose
A custom-made flexible hose for air to flow from the compressor to the Air Head. Purpose-built to handle the high pressure and volume requirements.
It is 50cm (1.6ft) in length and features secure bayonet fittings on each end.
Prodigy Top Flag
Block our flares and maintain contrast in your image with the Prodigy Top Flag with added protection from the elements. Quick & easy to install, constructed from carbon fibre.
Features
Prodigy Air Deflector Compressor
Powered by 24V (2-pin Lemo), with R/S connectivity (3-pin Fischer):
- Easy to rig using arms, rod brackets and clamps.
- Simple interface for operation with R/S connectivity.
- Automatic Polarity Detection (24V/10A).
- Rugged housing and military-grade filtration.
- Self-serviceable in the field or on location.
Prodigy Air Head
- Get a clear shot through rain, dust and debris.
- Low maintenance with no moving parts.
- Flat surfaces make it easy to bag your camera.
- No vignetting with wide angle lenses on large format sensors.
- Can be set up for clip-on or rod mounted with full range of Frame Safe clamp adapters.
Prodigy Power Cable
- Hand-built and tested for a reliable connection for the Prodigy Air Deflector
- High-quality 2-Pin 2B Lemo & XLR connectors
- Rated for 24V output with low voltage drop.
- Flexible 1.5m (4.9ft) long cable.
Prodigy Spare Glass
- Impact-resistant against chips and scratches.
- Superhydrophobic coating to repel water and particles.
- Optically clear to maintain lens characteristics.
- Easy to replace and install in a few minutes.
Prodigy Hose
- Purpose-built to handle high pressure and large volume of air.
- 50cm (1.6ft) long hose allows for flexible compressor placement.
- Kink resistant and durable to provide high air flow.
- One-piece quick release bayonet fittings for a secure connection.
Prodigy Top Flag
- Made from high-grade carbon fibre.
- Quick and easy to install with no tools required.
What is included
1x Prodigy Air Deflector Compressor.
1x Prodigy Air Head.
1x Prodigy Power Cable.
1x Prodigy Power Cable.
1x Prodigy Hose.
1x Prodigy Hose.
1x Prodigy Top Flag.
1x 4×5.65″/4×4″ Filter Tray (Misfit Kick).
1x 4×5.65″/4×4″ Filter Tray (Misfit Kick).
1x 4×5.65″/4×4″ Filter Tray (Misfit Kick).
1x Prodigy Spare Glass.
1x Frame Safe Clamp Adapters – 143mm.
1x Black Hole Rubber Donut (143mm).
1x 15mm LWS Support Bracket (Misfit Kick).
You might also like
You might also like
You might also like
Frequently asked questions
Sorry, no results found.
If you have any questions about this product, please make a question to solve it.
Sorry, an error has occurred while making the FAQ.
You must accept the the Privacy Policy.
The FAQ has been created correctly. Please wait to be verified.