

Designed for advanced KOMODO® users, the RED® 9-Pin EXT-to-Flying Lead Cable (1.3ft/ 15.6in) breaks out to any of the functions of the EXT port including: Timecode In/Out, GPI/ GPO, Genlock, RS-232 TX/RX and 5V Aux (500 ma Max) allowing users to create custom cables.
Timecode Out (Pin 2) is not currently supported on KOMODO.
PIN | SIGNAL | DESCRIPTION |
---|---|---|
1 | 5 V AUX | 5 Volt AUX (500 mA Max) enabled using the Power menu |
2 | Timecode Out | Timecode Out – SMPTE 12M1 |
3 | GPO | General Purpose Out, Tally or Sync, 3.3 Volt Logic Level1 |
4 | UART TX | RS-232 Transmit |
5 | UART RX | RS-232 Receive |
6 | GPI | General Purpose In, 3.3 Volt Logic Level2 |
7 | Timecode In | Timecode In – SMPTE 12M |
8 | Genlock | Tri-Level Genlock In (SMPTE 296M and 274M) |
9 | GND | Signal and Power Ground |
1. Not currently supported
2. The signal path includes a resistor pulling the signal high, which is designed to work with a closure switch connected to GND.
Frequently asked questions
Sorry, no results found.
If you have any questions about this product, please make a question to solve it.